TRANSMITTER
Key Features and benefits
1
High Quality Video
Best possible video and audio quality for Internet streaming. Automatically adapts to available bandwidth.
2
TV Output
Watch recorded files as well as real time video inputs directly on your TV.
3
Local USB recording
You dont need a PC to record video, shcedule and record directly using a USB memory plugged to the transmitter.
4
IR Blaster
You can use it to control most tuners。
5
Recording
Supports instant or scheduled recording.
6
Double Streaming
Can stream 2 inputs at the same time with full D1 quality.
7
Multiple Players
PC, MAC, smartphone, Tablet as well as our exclusive receiver box can be used to connect to the transmitter。
8
Easy installation
The transmitter will connect automatically on most UPnP enabled routers. You wont have to do port forwarding manually.
9
2 inputs
Both inputs will take any composite signal and stream it with the maximum quality.
10
Firmware Updates
New firmwares provide better stability and increased capabilities.
* Only compatible with ralink 2571 based USB wifi adapters.
System Requirements
Net-TV Transmitter
- Internet Access （UPnP compatible routers are strongly recommended as it simplifies installation.）
- DVD,DVR,hard disk recorder, TV tuner, security camera or any other composite video input.
- 256Kbps upload speed （the better the upload speed the better your image quality will be）.
- A flash memory to enable recording on the transmitter (only USB 2.0 - FAT32 file system)
Net-TV 2012 for Windows
- CPU：Intel Pentium 4 1.5GHz or better
- RAM：512MB (2GB recommended)
- 100MB free hard disk space
- A graphic card with proper drivers and compatible with DirectDraw Overlay
- Sound card or integrated sound system
- Internet access
Net-TV 2012 for MAC
- Only compatible with Intel CPUs
- RAM：512MB (1GB recommended)
- MacOS X 10.6 or higher
- 100 MB of hard disk space.
Net-TVmobile2 for Android
- Android 1.6 or higher.
- 5MB of free space.
- 3G/4G or Wi-Fi internet access.
- 150Kbps or higher download speed.
Net-TV mobile2 for iPhone
- Compatible devices:iPhone, iPod touch.
- Before updating to the latest iOS version please contact us to verify the application works.
- 5MB of free space.
- 3G/4G or Wi-Fi internet access.
- 150Kbps or higher download speed.
Net-TV mobile2 for iPad
- iOS 4.2 or higher
- Before updating to the latest iOS version please contact us to verify the application works.
- 5MB of free space.
- 3G/4G or Wi-Fi internet access.
- 150Kbps or higher download speed.
Windows Phone
- Windows Phone 7.5 or higher
- 5MB of free space.
- 3G/4G or Wi-Fi internet access.
- 150Kbps or higher download speed.
Package contents
The following items are included with your NET-TV transmitter.
Specifications
| システム | |
| OS | Embedded Linux |
| CPU | Dual core (ARM 9 + DSP) |
| Memory | Flash:16MB; RAM:256MB DDR2 |
| TV Signal | NTSC and PAL |
| Network Protocols | HTTP, UDP, TCP/IP, SMTP, FTP, NTP, PPPoE, DHCP, UPnP, RTSP |
| インターフェース | |
| Camera input | 1 x camera input（BNC female） 1 x Audio input （3.5mm、mini jack） 1 x Audio output （3.5mm、mini jack） |
| Video and Audio input | 1 x AV IN (via provided 3-in-1 AV cable) |
| Video and Audio Output | 1 x AV IN (via provided 3-in-1 AV cable) |
| USB | 2 x Type A USB Host Ethernet: 1 x RJ-45 IR Blaster: 1 x 3.5mm mini jack |
| Power | Power: 1 x DC Jack - 5V 2A(CE, UL, FCC, PSE certified) |
| LED | Power, Network, USB |
| Reset Button | Reset button is located at the rear |
| 録画 | |
| Video quality options | D1, Half D1 , CIF, frame rate option 1/30 fps |
| File type for records | MP4 |
| Record Media | USB 2.0 flash memory or external HDD (needs external power) |
| File system | FAT32 |
| Record quality | D1（1.5Mbps）、Half D1（1Mbps）、CIF（512Kbps） |
| 一般 | |
| Power consumption | 5.5VDC, 2A |
| Power | 10watts |
| Operating Temparature | 0℃～35℃、humidity should be kept bellow 80%. |
| Storage temperature | -10℃～50℃、humidy should be kept bellow 95%. |
| Size | 185(L)x124(W)x28.5(H)mm |
* The specifications may be subject to changes.
Product Appearance
Front Panel
1
USB Port：
DISK： Record and play videos with a USB drive。
WiFi： Connect to a wireless router with a USB wifi adapter (only for adapters based on chip ralink 2571).
2
IR Blaster port：
Connect the included IR cable. Can be used to transmit and control IR devices remotely.
3
IR remote controller sensor：
Point here when you are doing IR learning and to control the transmitter.
4
Status indicators：
USB： Will turn red when a USB disk is plugged.
NET：Green when the transmitter can access the Internet, Red when it can only access the local network.
PWR：Green when the transmitter is powered on.
Back Panel
1
DC input：
Plug the included power adapter.
2
ETHERNET：
Plug to your router or PPPoE modem.
3
AV-OUT：
Use with the included 3 in 1 AV cable.
4
CAMERA&AUDIO IN/OUT：
Camera input （BNC）、Audio output（mini jack 3.5mm）、audio input（mini jack 3.5mm）。
5
RESET：
Power the transmitter and press theh reset button 3 seconds to reset all settings to factory condition.
6
AV-IN：
Plug the included 3 in 1 AV cable. Use this to connect your tuner, DVD recorder, etc.
Status lights
There are three lights on the net-tv transmitter.
| LED | 表示 | 状態 |
| PWR | ● LIGHT OFF ● DARK GREEN ● LIGHT GREEN ☀GREEN FLASHING |
The power of the box is off The box is starting up or in standby The box is operating The box is resetting to the factory defaults |
| NET | ● LIGHT OFF ● RED STATIC ☀RED BLINKING ● GREEN STATIC ☀GREEN FLASHING |
No network detected LAN functionality is enabled The box is sending or receiving data over LAN Internet access is enabled The box is sending or receiving data over either WAN or WAN+LAN |
| USB | ● LIGHT OFF ● RED STATIC ☀RED BLINKING |
The USB storage is not being used The USB storage is plugged into the USB port When data is read or written to the USB disk |
RECEIVER
Key Features
Instead of using a PC/MAC or smartphone application. You can just plug the receiver to your TV anywhere in the world and control it easily from your sofa.
* You can switch and watch both AV and CAM inputs. While PC/MAC and smartphone apps can use the virtual remote with both AV and CAM inputs, the reciever can only control the device attached to AV input.
Package contents
The items bellow are included with your net-TV receiver.
Product Appearance
Front Panel
1
USB Port：
DISK： Record and play videos with a USB drive。
WiFi： Connect to a wireless router with a USB wifi adapter (only for adapters based on chip ralink 2571).
2
IR Blaster port：
Connect the included IR cable. Can be used to transmit and control IR devices remotely.
3
IR remote controller sensor：
Point here when you are doing IR learning and to control the transmitter.
4
Status indicators：
USB： Will turn red when a USB disk is plugged.
NET：Green when the transmitter can access the Internet, Red when it can only access the local network.
PWR：Green when the transmitter is powered on.
Back Panel
1
DC input：
Pug the included power adapter.
2
ETHERNET：
Plug to your router or PPPoE modem.
3
AV-OUT：
Use the included 3 in 1 cable to plug the receiver to your TV.
4
RESET：
Power the transmitter and press theh reset button 3 seconds to reset all settings to factory condition.